- per page
4'' 3 Ton Block
SKU: 700028
These 4'' ball bearing blocks are the best blocks available for boat lifts. They are hot dipped galvanized 3 ton blocks with ball bearings and grease fittings. Blocks are one of the most important parts to a boat lift. Bad blocks will cause friction and will add weight to the hoist.
BHUSA Overhead Lift Guide
3'' 1.5 Ton Block
SKU: 700027
These 3'' ball bearing blocks are the best blocks available for boat lifts. They are hot dipped galvanized 1.5 ton blocks with ball bearings and grease fittings. Blocks are one of the most important parts to a boat lift. Bad blocks will cause friction and will add weight to the hoist.
BHUSA Overhead Lift Guide
Small Aluminum Pulley Bracket
SKU: 700313
Aluminum Pulley Bracket with a 4" pulley and axle bolt for regular flange beams.
Large Aluminum Pulley Bracket
SKU: 700314
Aluminum Pulley Bracket with a 4" pulley and axle bolt for wide flange beams.
Galvanized Eye Bolt 5/8'' x 10''
SKU: 700048
Galvanized Eye Bolts are primarily used in overhead installations as a means to dead end cable when compounding a boat lift.
Boat Hoist USA recommends using the 9" or 12" strap hangers to hang blocks, not eye bolts.
Boat Hoist USA recommends using the 9" or 12" strap hangers to hang blocks, not eye bolts.
4'' Aluminum Sheave
SKU: 700315
4" aluminum sheaves have bronze bushings and will accept a 1/2" bolt.
3'' Galvanized Sheave
SKU: 700271
3" galvanized sheaves have bronze bushings and will accept a 1/2" bolt.
1550 lb Swivel Eye Block
SKU: 700032
Zinc plated pulley and sheave with bronze bushings. Has an eye that can rotate 360 degrees. Rated for 1550 lbs.
- per page
