Boat Hoist USA’s BH85 represents the most advanced and best engineered flat-plate boat hoist available on the market. By introducing revolutionary design changes in the flat-plate boat hoist, BHUSA can claim to have created the only true 8500lb straight line flat plate boat hoist. The BH85 is the only flat-plate boat hoist available with a solid bronze 96 tooth worm gear. The worm gear is matched with a hardened, polished steel worm seated in an enclosed aluminum housing that extends behind the gear to reduce torque. BHUSA has effectively removed ALL steel on steel moving parts and introduced a bronze back-plate bearing. Bronze is a true bearing surface and should be used in any bearing application. By eliminating the inferior steel bearing, BHUSA has effectively eliminated a large percentage of friction.
The BH85 simply will lift more, last longer and run smoother than other flat plate boat hoist on the market. BHUSA’s boat hoists, including the BH85, are all backed by an unprecedented Lifetime Gear Plate Warranty. To date, BHUSA has never replaced a hoist due to a design failure. The BH85 has become the first choice of professional installers simply because of its unprecedented record.
Standard Features: The BH85 comes standard with a painted (powder coated) back plate, Leeson 1.5 hp TENV motor, 16 ft control cable, maintain switch and a 100volt In-Plug GFCI.
Facts About The BH85
|
Manufactured |
Longview, Texas |
|
Capacity |
8500lb Straight Line Pull |
|
Warranty |
Lifetime Warranty on Gear Plate Assembly
1 Year Limited Warranty on the Motor & Wire Harness
(See BHUSA Equipment Guide for Details) |
|
Back Plate Options |
Powder Coated (Standard), Hot-Dipped Galvanized |
|
Back Plate Dimensions |
12" x 24" and 1/4" Thick |
|
Back Plate Mounting Hole Dimensions |
9/16" Hole for1/2" Bolt GR5
10" Center to Center |
|
Electric Motor |
1.5 hp Reversible Dual Voltage Motor |
|
Electric Motor Options |
Leeson Painted Motor(Standard), Leeson TEFC Stainless Steel Motor or East Bay Stainless Steel |
|
Motor Mounting |
56 Frame |
|
Amps Required |
19.4/115, 9.7/230 Leeson (Standard) |
|
Belts Used |
Two AX-34 Cogged Drive Belt on Dual Cast Aluminum Pulleys |
|
Switch Options |
Maintain Switch (Standard) or Spring Loaded Switch |
|
GFCI Options |
110volt In-Plug GFCI (Standard)
110volt In-Line GFCI
220volt In-Line GFCI |
Advantages of BHUSA Hoists Over Other Flat Plate boat Hoists
NO STEEL-ON-STEEL moving parts: BHUSA hoists are the only lifts that eliminate all steel on steel moving parts by using bronze bearings. Bronze on steel allows the hoist to lift more, run smoother, and last longer.
All aluminum worm housing: BHUSA encloses the worm in an aluminum housing, completely encapsulating the worm gear. This helps stiffen the back plate and holds the grease on the worm, requiring far less maintenance than most competitors
Bronze oil light back plate bearing: BHUSA has eliminated the steel back plate bearing and replaced it with a bronze bearing. Bronze is a true bearing surface; steel is not. The fact that our competitors use steel bearings should say it all.
Cast Aluminum Pulleys, NOT METEAL: Cast aluminum pulleys provide a truer yield, more strength, and ensures the cogged belt will not slip. BHUSA is the only hoist company that has taken the time to have 10” and 2” pulleys designed, casted and specifically made for their line of hoists. Plus, these pulleys will not rust!
Equipment Guide
Overhead Lift Guide
Warranty:
Lifetime on gears and 1 year on electrical
This Product Has Available Up-grades
Product Options:
Select from the options available below for this product. Required options are marked with a *
|
.jpg)
